background image

Error Code

427

Pr

oble

m S

o

lv

in

g

13

016-765

[Cause] Unable to send the e-mail because the hard disk on the SMTP 

server is full.

[Remedy] Consult the SMTP server administrator.

016-766

[Cause] An error occurred on the SMTP server.
[Remedy] Consult the SMTP server administrator.

016-767

[Cause] Unable to send the e-mail because the address is not correct.
[Remedy] Confirm the address, and try sending again.

016-768

[Cause] Unable to connect to the SMTP server because the machine's 

mail address is incorrect.

[Remedy] Confirm the machine's mail address.

016-769

[Cause] The SMTP server does not support delivery receipts (DSN).
[Remedy] Send e-mail without setting delivery receipts (DSN).

016-770

[Cause] Direct Fax is restricted.
[Remedy] Consult your system administrator whether Direct Fax is 

available. If it is available, contact our Customer Support Center.

016-772

[Cause] The DNS server address is not set.
[Remedy] Set the DNS server address.

016-774

[Cause] Unable to process compression conversion because of 

insufficient hard disk space.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

016-775

[Cause] Unable to process image conversion because of insufficient hard 

disk space.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

016-776

[Cause] An error occurred during image conversion processing.
[Remedy] For errors occurring when forwarding with Store to Folder or 

Internet Fax: The image conversion processing for the part of the 
data may be completed. Retrieve each converted page from the 
folder using CentreWare Internet Services.

For more information, refer to "Configuring Machine Settings Using 
CentreWare Internet Services" (P.255)

.

For errors occurring after instructing encryption or signature using 
a certificate: 
Take one of the following measures:

z

Check whether the certificate is valid.

z

Set the correct date and time on the machine.

016-777

[Cause] A hard disk error occurred during image processing.
[Remedy] The hard disk may be defective. To replace the hard disk, contact 

our Customer Support Center.

016-778

[Cause] The conversion processing of the scanned image was interrupted 

because of insufficient disk space.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

016-780

[Cause] A hard disk error occurred during scanned image conversion 

processing.

[Remedy] The hard disk may be defective. To replace the hard disk, contact 

our Customer Support Center.

Error Code

Cause and Remedy

Summary of Contents for DocuPrint CM505 da
























































































































































































































































































































































































































































































































































































































Reviews: