Fuji Xerox DocuPrint CM225FW, User Manual

Page: 55 / 344

Printer Connection and Software Installation 55
• Manual SSID Setup
1
Press the ( System ) button.
2
Select the
Tools
tab.
3
Select
Admin Settings
.
4
Select
Network
.
5
Select
Wireless
.
6
Select
Wireless Setup Wizard
.
7
Select the
Manual SSID Setup
check box, and then select
Next
.
8
Enter the SSID, and then select
Next
.
9
Select the network mode from
Infrastructure
or
Ad-hoc
depending on your environment, and then select
Next
.
10
Select the encryption type from
Mixed mode PSK
,
WPA2-PSK-AES
, or
WEP
.
IMPORTANT:
• Be sure to use one of the supported encryption types to protect your network traffic.
NOTE:
• If you have selected
Ad-hoc
for the network mode,
WEP
is the encryption type.
To use Mixed mode PSK or WPA2-PSK-AES encryption:
a
Select the desired encryption type.
b
Select the
Enter Password
text box, and then enter the passphrase.
c
Select
OK
.
NOTE:
• A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric (and 64
hexadecimal) characters. It may be described as a key on some access points or routers. For details, refer to the manual
supplied with the access point or router.
To use WEP encryption:
a
Select
WEP
.
b
Select the
Enter WEP Key
text box, and then enter the WEP key.
c
Select
Transmit Key
, and then select the desired transmit key from
WEP Key 1
to
WEP Key 4
.
d
Select
OK
.
When the Manual SSID Setup is successful, wireless connection is established and setup for wireless LAN is
complete.