Fuji Xerox DocuPrint CM225FW, User Manual, Page: 213 / 344

Using the Operator Panel Menus and Keypad 213
PS
Use the
PS Settings
menu to change printer settings that only affect jobs using the PostScript 3 Compatible
printer language.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript 3 Compatible errors.
Values:
NOTE:
• Instructions from the PS driver override the settings specified on the operator panel.
• PS Job Timeout
Purpose:
To specify the runtime of one PostScript 3 Compatible job.
Values:
• Output Color
Purpose:
To specify the color mode to
Color
or
Black
&
White
. This setting is used for a print job which does not specify a
print mode.
Values:
• Image Depth
Purpose:
To specify the image depth setting to 1 bit or 2 bit.
Values:
PDF
Use the
PDF Settings
menu to change printer settings that only affect the PDF jobs.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
Off
Discards the print job without printing an error message.
On
* Prints an error message before it discards the job.
Off
* Job timeout does not occur.
On 1min
A PostScript 3 Compatible error occurs if processing is not completed after the
specified time.
1 – 900min
Color
* Prints in color mode.
Black
&
White
Prints in black and white mode.
1 Bit
Prints in 2 bit color or if you use the other PS driver not provided with this printer, it
prints in 1 bit color.
2 Bit
* Prints in 2 bit color.