Fuji Xerox DocuPrint CM215 b User Manual Download Page 309

Page: 309 / 418

Using the Operator Panel Menus and Keypad

309

• Lighten/Darken

Purpose:
To set the default scan density level.
Values:

• Sharpness

Purpose:
To set the default sharpness level.
Values:

• Auto Exposure

Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:

• Margin Top/Bottom

Purpose:
To specify the value of the top and bottom margins.
Values:

Lighten2

Makes the scanned image lighter than the original. Works well with
dark print.

Lighten1

Normal

Works well with standard type or printed documents.

Darken1

Makes the scanned image darker than the original. Works well with
light print or faint pencil markings.

Darken2

Sharpest

Makes the scanned image sharper than the original.

Sharper

Normal

Does not make the scanned image sharper or softer than the original.

Softer

Makes the scanned image softer than the original.

Softest

Off

Does not suppress the background.

Suppresses the background of the original to enhance text on the
scanned image.

2mm

/0.1 inch

Specify the value in increments of 1 mm/0.1 inch.

0-50mm/0.0-2.0 inch

Summary of Contents for DocuPrint CM215 b


































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 b

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint CM215 b, User Manual

Search results

Summary of Contents for DocuPrint CM215 b

Reviews:

Brands by name

Popular brands