manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 331

7.9 Security Features

331

7.9

Security Features

Security Feature Overview

This section explains various security features of the printer and how to configure them. The 
information in this section is intended for the system administrator of the printer. For details on 
each feature, refer to the reference pages in the following table. 

Feature

Description

Refer to

Communication encryption

Data can be encrypted for communication between the printer 
and computers over a network.
• Encryption of client-computer-to-printer HTTP communication 
• Encryption of printer-to-LDAP-server HTTP communication 

(SSL/TLS client) 

• Encryption using IPSec

Note

• This feature is not supported on the model available in China.

"7.10 Configuring 
Encryption Settings" 
(P. 344)

Secure Print

When printing a confidential document or document that you do 
not want third parties to see, you can temporarily store the 
document in the printer and print it after entering a password on 
the control panel. 

Note

• Installing the HDD Extension Kit (optional) or enabling the RAM 

disk is required.

"3.5 Printing confidential 
documents - Secure Print -" 
(P. 72)

Private Charge Print and 
Charge Print using an Smart 
card

IC Card Reader (optional or purchase separately) connected to 
the printer uses the smart card validation for output. Output data 
is accumulated temporarily in the printer in the case of Private 
Charge Print and Charge Print.

Note

• Installing the HDD Extension Kit (optional) or enabling the RAM 

disk is required.

• Refer to your dealer for information about the IC Card Reader. 

"3.8 Private Charge Print" 
(P. 83)
"3.9 Charge Print" (P. 85)

HDD encryption

Configure this setting for system internal (NV memory, HDD 
Extension Kit (optional)) data encryption. 

Important

• Changing the setting of this item initializes the hard disk. 

Note

• The HDD Extension Kit (optional) must be installed to use this 

feature.

• HDD encryption is not supported on the model available in 

China.

"[Data Encryption]" 
(P. 167)

Overwrite Hard Disk

Deletes data on HDD Extension Kit (optional) by overwriting it. 
Overwriting can be performed multiple times to ensure that data 
on the hard disk is completely deleted. 

Note

• The HDD Extension Kit (optional) must be installed to use this 

feature.

"[Overwrite HD]" (P. 167)

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands