manualshive.com logo in svg

Fuji Xerox DocuPrint C5155d, User Manual

Share
Download
Fuji Xerox DocuPrint C5155d User Manual Download Page 208

208

6 Troubleshooting

Paper Jams in Tray 6 (HCF B1)

The following describes how to clear paper jams occurring in Tray 6 (HCF B1, optional).

Paper Jams in Tray 6 Exit

1.

Gently move Tray 6 to the left until it stops by 
gripping the handle on the top left side of 
Tray 6.

2.

Remove the jammed paper.

Note

• If the paper is torn, make sure no pieces of paper remain 

inside Tray 6.

3.

Gently put Tray 6 back into position.

Important

• Slide the tray back slowly. If you do it with too much 

force, the tray may cause a trouble.

Paper Jams in Tray 6 Top Cover

1.

Gently move Tray 6 to the left until it stops by 
gripping the handle on the top left side of 
Tray 6. 

Summary of Contents for DocuPrint C5155d


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands