7.9 Security Features
345
Controlling Data Reception by IP Address
Data reception by the printer can be controlled by registering the IP address of computers
that are permitted to send data. The following explains how to set this feature using
CentreWare Internet Services.
Note
• This setting also can be configured using the control panel in an IPv4 network environment. For
information on how to configure settings on the control panel, refer to “[IP Filter (IPv4)]” (P. 167).
1.
Launch your web browser and access CentreWare Internet Services.
Note
• If you want to change the display language of CentreWare Internet Services, change the display
language of your web browser. For information on how to change the display language of your web
browser, refer the online help for the web browser.
• For information on how to access CentreWare Internet Services, refer to “1.6 Configuring the Printer
Using CentreWare Internet Services” (P. 41).
• If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2.
Click the [Properties] tab.
3.
On the menu on the left, click [Security] > [IP Filtering].
4.
Select the [Enabled] check box under [IP Filtering] for [IPv4 Filtering] or [IPv6 Filtering]
and then click [Add].
5.
On the screen that appears, use [Source IP Address] to specify the IP addresses to
be enabled for TCP/IP connection.
