138
5 Control Panel Settings
Changing the Settings
Basic Procedure
To display a menu screen or to move up and down the menus to make the printer settings,
use the following buttons on the control panel.
Note
• Once you save a value by pressing the <OK> button, a “•” mark appears before the value. To change the
value, return to the initial screen and repeat the preceding steps.
• To enable the settings of some items, the printer sometimes must be restarted. In this case, the printer
automatically restarts when the menu screen is exited.
Resetting a Value to Its Default
For items to change numeric values with the < > or < > button, press the < > and < >
buttons simultaneously to reset a value to its default.
The value changes to its factory setting. To accept the value, press the <OK> button.
Ready to print
Settings
Admin Menu
(print screen)
(menu screen)
Press to display the menu items in the same hierarchy
Press to display the menu screen
appears before already
set options.
Press to accept
the selection
Press to close the menu screen
<Settings>
< >
< >
<OK>
<Back>/< >
(option selection screen)
<Settings>
<OK>/< >Press to display a lower hierarchy
<Back>/< >Press to display a higher hierarchy
<OK>/< >
Settings
LanguageEmulation
Admin Menu
Network/Port
Port Status
Enabled
