background image

6.2 Clearing Paper Jams

198

Trouble

s

hooting

6

For long-size paper

Procedure

1

While pushing up the release lever (1), 
slowly open cover L4 (2).

2

If the leading edge of the paper cannot 
be seen or cannot be held with hands 
when cover L4 is opened, pull it out 
straight in the direction of the arrow.

3

If the paper does not reach the fuser 
unit (fuser cartridge), remove it by pull-
ing the paper straight in the direction of 
the arrows with both hands.

Do not try to pull the paper from the bypass tray side. 
Unfused toner may be on a roller, staining the paper 
that is loaded next.

Never touch a labeled area found on or 
near the fuser.  You can get burnt. If a 
sheet of paper is wrapped around the 
heat roller, do not try to remove it by 
yourself to avoid injuries or burns.  
Switch off the machine immediately, 
and contact our Customer Support 
Center.

(1)

(2)

Summary of Contents for DocuPrint C4350


















































































































































































































































































































































































Reviews: