Fuji Xerox DocuPrint C4350, User Manual

Page: 180 / 369

5.5 Replacing Consumables
150
Ma
int
enanc
e
5
5.5.7
Disposing Chips from Punch Dust Box
If the Professional Finisher (optional) is installed and the punch dust box is full of
chips, a message appears on the LCD of the control panel. Dispose the chips
according to the message.
When the punch dust box is pulled out, make sure to dispose all chips without
remaining any. If chips are remaining, the box will be full before the next mes-
sage appears, resulting in printer trouble.
Dispose chips from the punch dust box while the printer is on. Otherwise, the system cannot recognize
that chips are disposed.
Procedure
1
Check that the printer is not printing,
and then open the front cover of the fin-
isher.
2
Pull out the punch dust box (R4) as
shown in the figure on the right.
3
Dispose collected chips.