manualshive.com logo in svg

Fuji Xerox DocuPrint C3055 DX, User Manual

Share
Download
Fuji Xerox DocuPrint C3055 DX User Manual Download Page 186

186

7 Maintenance

7.8

Authentication and Auditron 
Administration Features

The printer has the Authentication feature that controls access to the printer's features and 
the Auditron Administration feature that manages the use of each feature.
This section briefly explains the overview of the Authentication and Auditron Administration 
features and the settings required for both features. The information in this section is 
intended for system administrators.

Overview of the Authentication and Auditron Administration Features

If you enable the Authentication and Auditron Administration features on the printer, you can 
limit users who can access the printer, and manage and count the number of sheets printed 
by each user. 

Restricted Features

Enabling the Authentication and Auditron Administration features controls the use of the 
following features.

„

Printing from Computers

Depending on the job type, the use of the following features will be restricted. 

Job Type

Restricted Features

Printing using the print driver

You must set the login information such as your user ID and 
password on your print driver. Only jobs with login information that 
matches the information registered on the printer can be printed. 
When you are prohibited to print in colors, you can only print in 
monochrome. When you are only permitted to print certain number of 
pages, you are not allowed to print if the number has reached the 
maximum. 

Printing without using the print 
driver (when, using emulation, 
such as ESC/P, the E-mail 
print feature, or Contents-
Bridge Utilily)

You are allowed to print only when the [Non-account Print] setting on 
CentreWare Internet Services is set to [Enabled]. This setting is disa-
bled by default.

Summary of Contents for DocuPrint C3055 DX















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands