Fuji Xerox DocuPrint 5105 d User Manual Download Page 306

Page: 306 / 419

306

7 Maintenance

Disposal procedure

Make sure that the machine is not operating,
and open the finisher front door.

Pull out the hole punch waste container [R4].

Empty the container.

Insert the emptied hole punch waste
container into its original position until it
stops.

Close the finisher front door.

Note

• If the front door is not closed completely, a message

appears and the machine will remain paused.

Replacing the Fusing Unit

The following messages appear on the printer’s control panel when the fusing unit is near or
reaches the end of its service life.

Summary of Contents for DocuPrint 5105 d



































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Related manuals for DocuPrint 5105 d

Brands by name

Popular brands

Fuji Xerox DocuPrint 5105 d, User Manual

Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Related manuals for DocuPrint 5105 d

Brands by name

Popular brands