Fuji Xerox DocuPrint 5105 d User Manual Download Page 298

Page: 298 / 419

298

7 Maintenance

Replacement Procedure

After confirming that the printer is not
performing any operation, open the front
cover.

Hold the lower part of the toner cartridge and
gently slide out the cartridge.

Hold the handle on the top of the cartridge,
and pull it out from the printer.

Important

• Slide out the toner cartridge gently. Otherwise, toner may

spill from the cartridge.

Unpack the new toner cartridge and shake it
five or six times to distribute the toner evenly.

Insert the toner cartridge in gently until it
stops.

Close the front cover.

Note

• If the front cover is not completely closed, a message will

appear and the machine remain paused.

Summary of Contents for DocuPrint 5105 d



































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint 5105 d, User Manual

Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Brands by name

Popular brands