Fuji Xerox DocuPrint 5105 d User Manual Download Page 234

Page: 234 / 419

234

6 Troubleshooting

Return the handle 2a to its original position.

Close the folder unit door of the Folder Unit
CD1.

Note

• A message will be displayed and the machine will not

operate if the folder unit door of the Folder Unit CD1 is
even slightly open.

Paper Jams at the Handle 2b

Make sure that the machine has stopped, and
open the folder unit door of the Folder Unit
CD1.

Move the handle 2b to the left (1), and
remove the jammed paper (2).

Note

• If paper is torn, check for any torn pieces of paper inside

the machine.

Return the handle 2b to its original position.

Close the folder unit door of the Folder Unit
CD1.

Summary of Contents for DocuPrint 5105 d



































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint 5105 d, User Manual

Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Brands by name

Popular brands