Fuji Xerox DocuPrint 5105 d User Manual Download Page 228

Page: 228 / 419

228

6 Troubleshooting

Paper Jams in the Finisher Transport (Cover F)

Open the top cover F of the finisher transport.

Remove the jammed paper if there is.

Close the top cover of the finisher transport.

Paper Jams at the Handle 3a

Open the finisher front door.

Move the handle 3a upwards (1), and remove
the jammed paper (2).

Note

• If paper is torn, check for any torn pieces of paper inside

the machine.

Return the handle 3a to its original position.

Close the finisher front door.

Note

• If the finisher front door is not completely closed, a

message will appear and the machine remains paused.

Summary of Contents for DocuPrint 5105 d



































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Related manuals for DocuPrint 5105 d

Brands by name

Popular brands

Fuji Xerox DocuPrint 5105 d, User Manual

Search results

Summary of Contents for DocuPrint 5105 d

Reviews:

Related manuals for DocuPrint 5105 d

Brands by name

Popular brands