manualshive.com logo in svg

Fuji Xerox DocuPrint 5105 d, User Manual

Share
Download
Fuji Xerox DocuPrint 5105 d User Manual Download Page 227

6.1 Clearing Paper Jams

227

2.

Remove the jammed paper.

Note

• If the paper is torn, make sure no pieces of paper remain 

inside Tray 6.

3.

Push Tray 6 in gently until it stops.

Paper Jams in C3 Finisher / C3 Finisher with Booklet Maker

The following describes how to clear staple jams inside the finisher when the C3 Finisher 
(optional) or the C3 Finisher with Booklet Maker (optional) is installed.

Note

• Remedy differs depending on where the paper jam occurs. Follow the instructions displayed and remove the 

jammed paper.

Paper Jams in the Center Tray

1.

If you can see the edge of the jammed paper 
on the center tray, gently pull the paper to the 
right.

2.

Open the top cover of the finisher transport, 
and then close it.

Summary of Contents for DocuPrint 5105 d




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands