Fuji Xerox Document Centre C250, User Manual

Page: 75 / 556

Scan Options
73
Copy
3
[Margin Shift - Side 2] Screen
You can set the copy position/margin shift of Side 2.
1
Select [Side 2].
2
Select any item.
„
No Shift
Copies are made without the position of the document image being shifted.
„
Auto Center
Copies are made so that the center of the document matches the center of the paper.
„
Corner Shift
Copies are made with the document image shifted to the edges or corners of the paper.
You can select from eight shift directions.
„
Variable Shift
Enter the margin values for copying. Set the top, bottom, left, and right values within
the range from 0 to 50 mm in 1mm increments.
„
Independent Shift
You can make copies with settings different to those of Side 1.
„
Mirror Shift
Select this item when you want the positioning of Side 2 to match the positioning of Side
1.
Image Rotation (Making Copies with the Image Rotated Vertically or
Horizontally)
If the orientation of the paper currently loaded in the tray differs from that of the
document that is loaded, the machine automatically rotates the document image to
make copies with the document and paper orientations matched. You can also select
where to use as a reference for image rotation if documents are of mixed orientations.
The image rotation feature can only be used to make copies to paper of A4 and 8.5 ×
11 inches or smaller.
1
Select [Image Rotation].
2
Select any item.
„
Off
Copies of documents are made as they are, even if they are orientated differently.
„
Always On
Copies are made with the document image automatically rotated so that the orientation
of the document matches that of the paper.