Fuji Xerox Document Centre C250, User Manual

Page: 494 / 556

17 Appendix
492
App
e
ndix
17
Specifications
This section lists the specifications of the Document Centre C450/C360/C250. In the
interests of product development, product specifications and external appearance are
subject to change without prior notice.
For the latest information, contact our Customer Support Center.
„
Main Unit and Copier Specifications
Type Console Type
Color support Full color
Scan resolution 600 × 600 dpi (23.6 × 23.6 dots/mm)
Output resolution 600 × 600 dpi (23.6 × 23.6 dots/mm)
Color Graduation 256 color graduation for each color (16,700,000 colors).
Warm-up time 45 seconds or less (when the room temperature at 20 ºC).
Important • It may take more than 45 seconds when optional fax kits are
installed or due to the network environment configuration.
Copy document The maximum size is 297 × 432 mm (A3, 11 × 17 inch) for both
sheets and books.
Copy (sheet) size [Paper Tray - 4]
Maximum:
A3 (297 × 432 mm) or
11 × 17 inch (279 × 432 mm).
Minimum: A5 (148 × 210 mm)
[bypass tray]
Maximum:
12.6 × 17.7 inch (320 × 449.6 mm) or
12 × 18 inch (304.8 x 457.2 mm)
Maximum: postcard (100 × 148mm) or
envelope (120 × 235 mm)
Non-standard size:
X direction (horizontal) 100 to 483 mm,
Y direction (vertical) 100 to 305 mm (When
copying both sides on a non-standard size paper,
specify the size within the range from 148 to
432 mm for the X (horizontal) direction and from
140 to 297 mm for the Y (vertical) direction.)
Image loss width:
First 4mm or less, last 2 mm or less,
and top/front 2 mm or less.
Important • Copying may not be performed correctly when the X
(horizontal) direction of a non-standard size paper is less
than 140 mm.
Copy paper Paper Tray 1 - 4 : 64 - 169 g/m
2
Paper Tray 5 (Bypass) : 55 - 220 g/m
2
Important • It is recommend using Xerox recommended papers.
Copying may not be performed correctly depending on the
deployment conditions.