Fuji Xerox Document Centre C250 User Manual Download Page 459

Page: 459 / 556

Trouble during Scanning

457

Probl

lving

Unable to Send the Scanned Document over the Network (FTP/SMB)

Describes solutions when scanned documents cannot be sent over the network.

Problems with Sending E-mail

Describes solutions when e-mail cannot be sent.

Unable to forward over the
network

Cause

Is the server entered correctly?

Action

Check the inputted server.

Cause

Is the save location entered correctly?

Action

Check the save location.

Cause

When using SMB, is the Shared Name entered correctly?

Action

Check the Shared Name.

Cause

When using SMB (UNC Format), is the save location
entered correctly?

Action

Check the save location.

Cause

Is the login name entered correctly?

Action

Check the login name.

Cause

Is the password entered correctly?

Action

Check the password.

Unable to send e-mail

Cause

Mail address is incorrect

Action

Check the e-mail address.

Cause

Maximum sending e-mail size is exceeded

Action

Change the maximum sending e-mail size, or reduce the
resolution.

Refer to "Maximum E-mail Size" (P.318), or "Scan Resolution
(Specifying a Scanning Resolution)" (P.177).

Summary of Contents for Document Centre C250












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Document Centre C250

Reviews:

Brands by name

Popular brands

Fuji Xerox Document Centre C250, User Manual

Search results

Summary of Contents for Document Centre C250

Reviews:

Brands by name

Popular brands