Fuji Xerox Document Centre C250, User Manual

Page: 284 / 556

11 Setups
282
Setu
ps
11
„
Off (Copy on New Sheet)
Side 2 will be copied onto the front of a new sheet.
„
On
Side 2 is copied onto the back of the specified sheet.
Fine-tune 100%
You can fine tune magnification when copying at 100% (actual size). The set value is
applied when [Reduce/Enlarge] or [R/E Presets] on the [Basic Copying] screen is set
to 100%.
Set the height and width ratios within the range of 98 to 102% in 0.1% increments.
Important • This feature is only applied when making copies on the document glass. This is not applied
when using [Zoom], [Independent X-Y%], or when [R/E Preset] is set to 100%.
Note • Even if adjustments are made here, the magnification is still displayed as [100%].
1
Select [Fine Tune 100%], and
select [Change Settings].
2
Enter a ratio using [ ], [ ],[ ],
and [ ].
Auto Exposure (Text & Photo)
Set the auto exposure level for color copying. This setting is valid when [Text & Photo]
is selected for [Original Type] in the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Auto Exposure (Text)
Set the auto exposure level for color copying. This setting is valid when [Text] is
selected for [Original Type] in the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Text & Photo (Halftone) Originals
Set the type of original when [Text & Photo] > [Halftone] is selected for [Original Type]
in the [Image Quality] screen.
„
Normal
Copy with standard image quality.
„
Inkjet Originals
Select when copying an original printed with an inkjet printer. This improves the
recognition of inkjet colors.
„
Highlighted Originals
Select when copying an original marked with a fluorescent pen. This improves the
recognition of the fluorescent pen colors.
Original Type - Lightweight Originals
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether
to display a special original (original on thin paper).