Fuji Xerox Document Centre C250, User Manual

Page: 278 / 556

11 Setups
276
Setu
ps
11
Features Allocation
You can set the features that appear in the [Basic Copying Tab] screen, in the third and
fourth columns from the left. By setting the most commonly used features, you reduce
the need to use operations in other tabs.
1
Select [Features Allocation], and
select [Change Settings].
2
Select the features to be displayed.
3
From the buttons appearing on the
right, select the position for which you want to make a setting.
Note • The position of the buttons on the right of the screen shows the position of the buttons in the
[Basic Copying Tab] screen.
„
5 Features
The [Output Color], [Reduce/Enlarge], [Paper Supply], [2 Sided], and [Copy Output/
Stapling] features appear. Note that it is not possible to change the displayed features
or their layout.
„
6 Features
You can set the features appearing in the fourth column from the left of the [Basic
Copying Tab] screen. You can set up to three features.
Note • It is not possible to select [Output Color], [Reduce/Enlarge], or [Paper Supply].
„
8 Features
You can set the features appearing in the third and fourth columns from the left of the
[Basic Copying Tab] screen. You can set up to five features. However, the [Output
Color] at the top position in the third column is fixed.
Note • It is not possible to select [Output Color], [Reduce/Enlarge], and [Paper Selection].
4
Select the feature to be displayed,
and select [Save].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
5
Repeat steps 3 and 4 as required.
Paper Supply - 2nd Button
For the five feature buttons appearing in [Paper Supply] in the [Basic Copying Tab]
screen, you can set the second paper tray from the top. You can select from Trays 1 to
4, and Tray 5 (bypass).
Paper Supply - 3rd Button
For the five feature buttons appearing in [Paper Supply] in the [Basic Copying Tab]
screen, you can set the third paper tray from the top. You can select from Trays 1 to 4,
and Tray 5 (bypass).
Paper Supply - 4th Button
For the five feature buttons appearing in [Paper Supply] in the [Basic Copying Tab]
screen, you can set the fourth paper tray from the top. You can select from Trays 1 to
4, and Tray 5 (bypass).