General Settings
65
Cop
y
When [Independent X-Y%] is Selected
You can specify different length and width ratios to scale the height and width
independently.
1
Select any item.
Auto%
Copies are made with the height
and width ratios set automatically to
match the paper size. If this option
is selected, a check mark is added.
Copy All X-Y%
The length and width ratios are set
automatically to match the paper size and the document is copied at a slightly reduced
size to prevent image loss at the edge of the original. If this option is selected, a check
mark is added.
Width X%/Length Y%
Set the length and width ratios within the range from 25 to 400% in 1% increments.
XY
You can simultaneously change the numerical values of the height and width by the
same amount.
When [Calculator %] is Selected
You can specify a different size for the height and width.
If you specify both the original document size and the copy size, the copy ratios for the
length and width are calculated automatically within the range from 25 to 400%
according to the sizes that you entered.
1
Enter the value for the original
document width in [Original Size] of
[X] (width) using the numeric
keypad, and select [Next].
2
Enter the value for the copy size
width in [Copy Size] of [X] (width)
using the numeric keypad, and
select [Next].
3
In the same way, enter the original
document length value and copy
size length value in the [Original
Size] and [Copy Size] of [Y]
(length), and select [Next].
Note
•
To change the copy ratios you have entered, select [Next], move the mark, and enter the
new values.
