manualshive.com logo in svg

Fuji Xerox DocuColor 5065II, User Manual, Page: 405 / 416

Share
Download
Fuji Xerox DocuColor 5065II User Manual Download Page 405

List of Options

403

A

p

pe
nd
ix

14

List of Options

The following are the principal options available. To purchase these, contact our 

Customer Support Center.

Note

•

The products are liable to change.

•

For the latest information, contact our Customer Support Center.

Product name

Description

Offset stacking module

This unit allows to eject paper with an offset.

C-Finisher

This unit allows to staple or punch printed documents or 
copies.

C-Finisher with Booklet 
Maker

This unit allows to staple or punch printed documents or 
copies. Features for folding documents in half, and stapling the 
folded documents are also available.

D2-Finisher with Booklet 
Maker

Staples or hole-punches output. It also folds output in half or 
staples folded output.
Interposer is installed for loading paper to be used as 
separators and covers.

High capacity paper tray

This tray allows to load 2,300 sheets of paper (When using 
Xerox P paper).

A3+ High capacity paper 
tray

This tray allows to load 2,300 sheets of paper (When using 
Xerox P paper).

Summary of Contents for DocuColor 5065II

































































































































































































































































































































































































































Reviews:

No comments