Trouble during Copying
329
P
rob
le
m Solving
Trouble during Copying
Describes solutions for problems encountered during copying.
Unable to Copy
Describes solutions when unable to copy.
Document not fed
properly from the
document feeder
Cause Document size is too small.
Action The minimum size of the document that can be loaded
on the document feeder is A5.
Refer to "Step 1 Loading Documents" (P.56).
Cause The right type of document is not being used.
Action The document feeder cannot be used with irregular
sized documents, business cards, transparencies, or
thin documents.
In addition, documents with tags, paper clips, and
cellophane tape cannot be used.
Refer to "Step 1 Loading Documents" (P.56).
Cause The document guides are in the incorrect position.
Action Set the document guides to correctly match the
document size.
Refer to "Step 1 Loading Documents" (P.56).
Cause Part of the document is ripped, and a piece of paper
remaining in the document feeder.
Action Open the document feeder cover, and remove the piece
of paper.
Refer to "Document Jams" (P.381).
Cause Documents of different sizes are set.
Action When using documents of different sizes, you must
specify [Mixed Size Originals]. Otherwise, a paper jam
will result. When setting documents of different sizes, be
sure to specify [Mixed Size Originals].
Refer to "Mixed Sized Originals (Scanning Different Size
Documents Simultaneously)" (P.84).
