12 Maintenance
312
M
ainte
na
nc
e
6
Select [Image Quality Adjustment].
7
Select [Calibration].
8
Load paper.
Important •
Do not load paper exceeding
the maximum fill line. It may
cause paper jams or machine
malfunctions.
9
Select the screen type for
calibration.
Note
•
The example described here
is for the [Copy Job] screen.
10
Select the tray that you loaded paper in Step 10 for [Paper Supply], and then select
[Close].
Note
•
Only paper types can be set when you select the Tray 5 (bypass).
11
Select [Target] to set an area for applying the calibration, and then select [Close].
Note
•
Normally, select [Copy/Print] for [Applicable Area]. When using external calibration for print
output, set [Applicable Area] if necessary.
12
Select [Start].
Note
•
The message “Printing the Calibration Chart. Copy Job” appears and the document for
calibration (Calibration Chart) is printed.
