manualshive.com logo in svg

Fuji Xerox DocuColor 5065II, User Manual, Page: 288 / 416

Share
Download
Fuji Xerox DocuColor 5065II User Manual Download Page 288

12 Maintenance

286

M

ainte
na
nc
e

12

Replacing Supplies

The machine is provided with the following supplies and periodical replacement parts. We 

recommend using the following supplies and periodical replacement parts because they 

have been made according to standards that match the specifications of the machine.

„

Handling Supplies/Periodical Replacement Parts

z

Do not store boxes for supplies/periodical replacement parts upright.

z

Do not unpack supplies/periodical replacement parts until they are to be used. Avoid 
storing supplies/periodical replacement parts in the following locations:

- Hot and humid location
- Location close to a fire
- Location exposed to direct sunlight
- Dusty location

z

Before using supplies/periodical replacement parts, carefully read the instructions 
and precautions on the packaging.

z

We recommend having spare supplies/periodical replacement parts ready.

z

Check the product code of the supplies/periodical replacement parts and contact our 
Customer Support Center to place your orders.

z

The use of toner cartridges, waste toner containers, or staple cartridges not 
recommended by Xerox may impair quality and performance. Use only toner 
cartridges, waste toner containers, and staple cartridges recommended by Xerox for 
the machine.

„

Confirming Status of Supplies

The status of supplies can be confirmed on the [Supplies] screen.

The status is indicated by “Ready”, “Order New”, “Replace Now”, or other indications.

Also, an indication from 0 to 100% displays the remaining amount of toner.

For information about confirming supplies, refer to "Supplies" (P.278).

Type of supplies/

Periodical replacement part

Product code

Qty/Box

Toner cartridge [Y]

CT200571 

1 item / 1 box

Toner cartridge [M]

CT200570 

1 item / 1 box

Toner cartridge [C]

CT200569 

1 item / 1 box

Toner cartridge [K]

CT200568 

1 item / 1 box

Drum Cartridge K [R1] (Black)

CT350361 

1 item / 1 box

Drum Cartridge Y,M,C [R2/R3/R4] (Color)

CT350362 

1 item / 1 box

Waste toner container

CWAA0663 

1 unit / 1 box

Staples Type XE (3PCS)

CWAA0540

5000 staples x 3 sets /

1 box

Staples Type XC (4PCS)

CWAA0501

5000 staples x 4 sets / 

1 box

Staples Type XF (4PCS)

CWAA0677

5000 staples x 4 sets, 

Staple scrap container x 

1 unit / 1 box

Summary of Contents for DocuColor 5065II

































































































































































































































































































































































































































Reviews:

No comments