Fuji Xerox DocuColor 5065II User Manual Download Page 278

Page: 278 / 416

10 Machine Status

276

Mach

e S
ta

Copy Mode Settings

Select [Copy Mode Settings].

Select [Settings List - Common
Items].

Press the <Start> button.

Settings List - Common Items

You can check the hardware

configuration, network information,

and print and copy settings of the

machine.

Note

•

The same [Settings List] is
printed from [Copy Mode Settings] and [Scan Mode Settings].

Scan Mode Settings

Select [Scan Mode Settings].

Select the report/list to be printed.

Press the <Start> button.

Settings List - Common Items

You can check the hardware

configuration, network information,

and print and copy settings of the

machine.

Note

•

The same [Settings List] is
printed from [Copy Mode Settings], [Print Mode Settings], and [Scan Mode Settings].

Extended Features Settings List

You can check the settings of scan features.

Network Controller Jobs Report

Select [Network Controller Jobs
Report].

Select the report/list to be printed.

Press the <Start> button.

Note

•

The items displayed depend
on the options that are
installed.

Job History Report

You can check job results of the Network Controller.

Error History Report

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands