8 System Settings
232
S
yst
em S
et
tin
g
s
Maximum Stored Pages
Set the maximum number of stored pages of a copy original. You can set a number
from 1 to 999 pages.
Auto Paper Off
Select the tray used when [Auto] of [Paper Supply] in the [General Settings Tab] screen
is cancelled (the tray used when [Auto] of [Paper Supply] is selected in the [General
Settings] screen, and [Auto %] or [Independent X-Y %] is selected for [Reduce/
Enlarge]).
Mixed Size Originals - 2 Sided Copy
When the size of side 1 differs from that of side 2 in 2-sided copy, if different size of
originals for side 1 and side 2 are selected by automatic paper supply, sets the paper
to copy side 2 of original.
Important •
When the side 1 and side 2 of the originals are different, and if 2-side of originals are copied
of that of same paper, an image may be missing.
Off (Copy on new sheet)
Side 2 is copied on the front of a new sheet.
On
Side 2 is copied on the opposite side of Side 1 without changing the paper size.
Fine-tune 100%
You can fine-tune the magnification when copying at 100% (actual size). The set value
is applied when [Reduce/Enlarge] or [Proportional %] on the [General Settings] screen
is set to 100%.
Set the value in the X/Y direction within the range 98 to 102% in 0.1% increments.
Important •
This feature is applied only when a copy is made by the document glass. Moreover, it is not
reflected in the magnification (100%) set by [Variable %], [Independent X-Y%] and
[Calculator %].
Note
•
A magnification displays [100%] even if [Fine-tune 100%] is set.
1
Select [Fine-tune 100%], and
select [Change Settings].
2
Enter the magnification using [
],
[
], [ ], and [ ].
Background Suppress Level (Photo& Text)
Set the background suppression level for color copying. This setting is valid when [Photo &
Text] is selected for [Original Type] on the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
