Fuji Xerox DocuCentreS2320 User Manual Download

Page: 98 / 257

5 Copy

Co
py

•

You can select a custom paper size specified for Tray 5 (bypass). For more information, refer to "Tray
5" (P.140).

Follow the steps below to place document on the document glass.

You can place a single sheet document or bound document such as book on the document
glass.

Open the document cover.

Important •

When using the document glass, make sure to
close the document cover after finishing your
copy job.

Place the document face down, and align it
against the top left corner of the document glass.

Close the document cover.

Making Advanced Settings

Note

•

The displayed settings may vary according to models.

•

You may need to enter a passcode to use the copy feature. Ask your system administrator for the
passcode.

CAUTION

Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.

Summary of Contents for DocuCentreS2320

































































































































































































































































Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands

Fuji Xerox DocuCentreS2320, User Manual

Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands