Fuji Xerox DocuCentreS2320 User Manual Download

Page: 60 / 257

3 Product Overview

Prod

erv
iew

Machine Components

This section describes the machine components and their functions.

Front, Left Side

No.

Component

Description

Document cover

Holds document in place.

Document glass

Place document here.

Control panel

Contains the buttons, the LED indicators, and the display used for
operations.

For more information, refer to "Control Panel" (P.67).

Center tray

Copies and prints are delivered here, facing down.

Front cover

Open this cover to replace consumables.

Tray 1 (standard tray)

Load paper here.

Tray 2
(One Tray Module)
(Optional)

Optional tray. Load paper here.

Trays 3, 4
(Two Tray Module)
(Optional)

Optional trays. Load paper here.

Locking casters

Locks the wheels of the machine. Lock these casters after moving the
machine to its installation site.

Two tray module cover [C]

Open this cover to remove any jammed paper from Tray 3 or 4.

Summary of Contents for DocuCentreS2320

































































































































































































































































Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands

Fuji Xerox DocuCentreS2320, User Manual

Search results

Summary of Contents for DocuCentreS2320

Reviews:

Related manuals for DocuCentreS2320

Brands by name

Popular brands