Fuji Xerox DocuCentreS2320, User Manual

Page: 54 / 257

2 Environment Settings
54
Env
ironm
e
nt
Sett
in
gs
2
System Administrator Settings (Security)
You can set the system administrator's user ID and the passcode.

System Administrator Settings
 Administrator's Login ID
You can enter the system administrator's user ID (between 1 and 32 ASCII code
characters in length, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":". (Default: 11111)
 Administrator's Passcode
You can set the system administrator's passcode (between 4 and 12 ASCII code
characters or blank). (Default: x-admin)
 Retype Administrator's Passcode
You need to re-enter the system administrator’s passcode.
 Maximum Login Attempts
When login attempts using the system administrator’s user ID fail repeatedly, access is
denied when the number of failed attempts reaches the number set here.
Specify a number between 0 and 10. Specify 0 to disable this setting.
The total number of failed authentication attempts is reset when authentication is
successful or the system is restarted. (Default: 5)

[Apply] button
You can apply changes by pressing this button.
[Support] Tab
The links to support information is displayed. The link settings can be changed.
Support

[Change Settings] button
You can change the links to support information by pressing this button.
 Name
You can enter the link name (between 1 and 63 ASCII code characters).
 URL
You can enter the link address (between 1 and 63 alphanumeric characters
including the at symbol (@), percent sign (%), period (.), colon (:), forward slash (/),
underline(_), hyphen (-), tilde (~), question mark (?), and ampersand (&), which are valid).

[Apply] button
You can apply changes by pressing this button.
[Address Book] Tab
The list of location information where the scanned data is stored is displayed.
You can register the total of 30 E-mail and Server addresses.