Fuji Xerox DocuCentreS2320, User Manual

Page: 145 / 257

System Settings
145
Too
ls
8
You can select from [12H] or [24H].
[24H] is set at the time of factory shipment.
1
In the [Clock] screen, select [Time Format], and
then press the <OK> button.
2
Select the time display format, and then press
the <OK> button.
Other Settings
System Admin. Passcode
Used to set the passcode for entering System Administration mode.
You can enter between 4 to 6 numbers from 0 to 9.
[11111] (five "1" digits) is set at the time of factory shipment.
Follow the steps below to make the settings.
1
In the [System Settings] screen, select [Other
Settings], and then press the <OK> button.
For information on how to display the [Tools] screen, refer to
"System Settings Procedure" (P.136).
2
Select [System Admin. Passcode], and then press
the <OK> button.
3
Enter the desired passcode in the New Passcode
field.
Note • The entered passcode is displayed as asterisks
(*).
4
Press the <OK> button.
Maintenance
Used to clear the counter of the consumables/periodic replacement parts when directed by
your local Fuji Xerox representative.
Important • Do not use this function except as necessary.
Date Format... yy/mm/dd
Time Format... 24H
Clock
Date & Time...
24H
Time Format
12H
Region & Timer Settings...
Other Settings...
System Settings
Consumables Settings...
Other Settings
System Admin. Pass...
Maintenance...
Job History Verbose... Off
System Admin. Passcode
New Passcode
[* * * * * ]