Fuji Xerox DocuCentre SC2022, User Manual

Page: 83 / 412

4 Printing
83
4.4 Using Stored Print (Windows
®
)
The print documents can be stored temporarily in the machine, and can be printed from the operator panel. This
feature includes two types of jobs. One is Secure Print which can manage confidential documents by assigning
passcode, and the other is Sample Set which is convenient when printing a large number of copies.
Note
• The data in the memory is cleared when the machine is turned off.
• The stored print feature is available when all of the following conditions are satisfied:
- When [RAM Disk] is set to [Enable] on [Device]
- When [RAM Disk] is set to [Installed] on the print driver
- When the memory of the machine has enough free space to store data
- The stored print feature is available when you print a document from Windows
®
.
Secure Print
You can store print jobs secured with a passcode in the machine. This feature is useful to print confidential
documents, since the job can be printed only when the passcode is entered on the operator panel.
Sample Set
You can print a single copy as a sample before printing a large number of copies.
4.4.1 Secure Print
Specifying With the Print Driver
On the [Paper/Output] tab of the print driver, select [Secure Print] from [Job Type], and then send the print job.
Refer
• For details about a print driver feature, see the print driver help.
Note
• You must specify a passcode for the Secure Print job.
• The data in the memory is cleared when the machine is turned off.
Printing Secure Print Jobs
1.
Press the <Home> button.
Sending print job Entering passcode from the operator panel Printing document
Confidential
Printing one set to check Printing the rest of the set
x4
Sending print job