Fuji Xerox DocuCentre SC2022, User Manual, Page: 242 / 412

User Guide
242
[ECM]
Specify whether to enable the ECM feature. To use the ECM feature, the remote machines must also support the
ECM feature. ECM stands for "Error Correction Mode." With ECM, which is one of the G3 communication
methods, the machine checks that the data is properly sent to the recipient, and if not, resends the data.
[Modem Speed]
Select the fax modem speed when a fax transmission or reception error occurs.
[Display Manual Fax Recipient]
Specify whether to display a fax number for the recipient on the screen of the operator panel when manually
sending a fax.
[Fax Reports]
Configure the settings for fax reports.
[Fax Activity]
Specify whether to automatically print a fax activity report when the total number of fax communications
reaches 50.
[Fax Transmit]
Specify whether to print a transmission report after a fax transmission.
[Print Always]
Prints a transmission report after every fax transmission.
[Print On Error]
Prints a transmission report only when an error occurs.
[Print Disabled]
Does not print a transmission report after a fax transmission.
[Fax Broadcast]
Specify whether to print a transmission report after a fax transmission to multiple destinations.
[Print Always]
Prints a transmission report after every fax transmission.
[Print On Error]
Prints a transmission report only when an error occurs.
[Print Disabled]
Does not print a transmission report after a fax transmission to multiple destinations.
[Protocol Monitor]
Specify whether to print the protocol monitor report, which helps you identify the cause of a communication
problem.
[Print Always]
Prints a transmission report after every fax transmission.
[Print On Error]
Prints a transmission report only when an error occurs.
[Print Disabled]
Does not print the protocol monitor report.
10.8.13 [Email Settings]
Configure the e-mail settings.
[Max Email Size]
Specify the maximum size of an e-mail that can be sent.