Fuji Xerox DocuCentre S2220, User Manual

Page: 112 / 311

5 Copy
112
Co
py
5
Original - Binding Position
You can set the position when binding documents.
1
Select [Original - Binding Position], and then
press the <OK> button.
2
Select the binding position, and then press the
<OK> button.
„
Flip on Long Edge
Binds the long edge of document in portrait
orientation.
„
Flip on Short Edge
Binds the short edge of document in landscape orientation.
Output - Binding Position
You can set the position when binding output copies.
1
Select [Output - Binding Position], and then press
the <OK> button.
2
Select the binding position, and then press the
<OK> button.
„
Flip on Long Edge
Binds the long edge of document in portrait
orientation.
„
Flip on Short Edge
Binds the short edge of document in landscape orientation.
Edge Erase
You can set to erase the black shadows created around the edge of paper when copying with
the document cover open or copying a bound document.
You can set a value between 0 and 50 mm (in 1 mm increments) for the Edge Erase function.
Note • The value set for Edge Erase applies to all four edges of the document.
• For ID card copy, the Edge Erase is set separately. For more information, refer to "Edge Erase"
(P.170).
Auto
Original Size...
Off Pages per Side...
Flip on Long Original-Binding...
Copy
1
111
Flip on Short Edge
Original-Binding Position
Flip on Long Edge
Qty.
1
Flip on Long
Original-Binding Po...
Auto Original Size...
Flip on Long Output-Binding Posi...
Copy
1
111
Output-Binding Position Qty.
1
Flip on Short Edge
Flip on Long Edge