Fuji Xerox DocuCentre S2110 User Manual Download Page 18

Page: 18 / 229

Environment Settings

Environme

t Se

ttings

Supported Environment

This section describes the environment settings needed to use the machine's print and
scan features.

Print Feature

The machine can be connected directly to a computer for use as a local printer, or can be
connected to a network for use as a network printer.

Use as a Local Printer

Connect the machine to a computer with a USB cable.

Use as a Network Printer

Print from network-connected computers using the TCP/IP protocol.

To use the machine as a network printer, you need to activate the port to use for printing.

LPD: Activate this setting when using the LPD port.

Port9100: Activate this setting when using the Port9100 port.

Reference

For information on how to set TCP/IP, refer to "Setting the Network Environment" (P.23).

For information on how to activate a communication port, refer to "Activating the Communication Port To
Use" (P.25).

Local connection USB

Network Connection
LPD/Port9100

Summary of Contents for DocuCentre S2110





































































































































































































































Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands

Fuji Xerox DocuCentre S2110, User Manual

Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands