Fuji Xerox DocuCentre S2110 User Manual Download Page 110

Page: 110 / 229

Scan

110

Sc
a

Align the document guides to each side of the document.

Open the document stopper.

Document Glass

Supported document sizes

The maximum size is 297 x 432 mm.

Selectable document sizes in the scan driver

, A4

, A4 , A3

, B5

, B4

, 5.5 x 8.5"

,7.25 x 10.5"

, 8.5 x 11"

, 8.5 x 11" ,

8.5 x 13"

, 8.5 x 13.4"

, 8.5 x 14"

, 11 x 17"

, 16K

, and 8K

* : China (8K/16K) and Taiwan(8K/16K)

Note

TWAIN driver supports the document sizes described above.

The supported document size by Windows Image Acquisition (WIA) driver depends on the running
application.

Follow the steps below to place document on the document glass.

You can place a single sheet document or bound document such as book on the document
glass.

CAUTION

Do not apply excessive force to hold thick document on the document glass. It
may break the glass and cause injuries.

Summary of Contents for DocuCentre S2110





































































































































































































































Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands

Fuji Xerox DocuCentre S2110, User Manual

Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands