Fuji Xerox DocuCentre S1810, User Manual

Page: 67 / 202

Setting the Options Configuration
67
P
roduc
t O
v
er
vi
ew
3
Setting the Options Configuration
When the optional Simple Network Print Kit is installed, you can retrieve the information
of machine configuration into the print driver.
Update the information of machine configuration when an optional component is
changed.
When using the Ethernet interface
You can load the machine's option configuration automatically to the print driver.
Note • This feature is not available for some models. The optional Simple Network Print Kit is
required. For more information, contact our Customer Support Center.
• When using this feature, activate the SNMP port. (Default: Enabled)
• If you failed to retrieve the information of machine configuration or using the USB interface
connection, set the information of machine configuration manually. For more information,
click [Help] in the screen to display the Help Information.
Follow the steps below to configure the options configuration.
1
From the PC's [Start] menu, select [Printer and Faxes] to display the properties of the
printer in use.
Note • Some operating systems display [Printer] or [Devices and Printers] instead of [Printer and
Faxes].
2
Click the [Options] tab.
3
Click [Get Information from Printer].