Fuji Xerox DocuCentre-IV C2263, User Manual

Page: 128 / 443

3 Copy
128
Co
py
3
z
Print on Side 1
The first page of the document is copied on the front side of the back cover.
z Print on Side 2
The first page of the document is copied on the back side of the back cover.
z Print on Both
The first and second pages of the document are copied on the front and back sides of the
back cover.
„
Paper Supply
Displays the [Covers - Paper Supply] screen.
Select a tray to be used.
z Front Cover Tray
Select the tray used for front covers.
z Back Cover Tray
Select the tray used for back covers.
z Main Body Tray
Select the tray used for the body pages of the document.
When you use the bypass tray, select [Tray 5] on the [Covers - Paper Supply] screen. When [Tray 5] is selected, the [Tray 5]
screen is displayed. For more information, refer to "[Tray 5] Screen" (P.94).
Note •
If [Covers] is set, [Auto Detect] cannot be selected in [Tray 5].
„
Front Cover Quantity
This option is displayed when you select [Blank Covers] in [Front Cover]. Specify the number
of blank sheets to be used as front covers.
„
Back Cover Quantity
This option is displayed when you select [Blank Covers] in [Back Cover]. Specify the number
of blank sheets to be used as back covers.
Pages per Side (Copying Multiple Pages onto One Sheet)
This feature allows you to copy two, four, or eight pages of a document together onto a
single sheet of paper.
When you set [Pages per Side], [Auto %] is automatically selected in [Reduce/Enlarge]. The
machine automatically sets the copy ratio and makes copies of the images so that they fit
on the selected paper.
Note • When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio), image loss
may occur depending on the image size of the document.
• When [Image Shift] is set, the image shift amounts are applied to the whole document. For this
reason, image loss may occur depending on the image size of the document.
•
When [Edge Erase] is set, the edge erase amounts are applied to each document page.
• Select a tray other than [Auto Select] in [Paper Supply] on the [Copy] screen. If [Auto Select] is
selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically selected. Change the
setting as necessary. For information on [Auto Paper Off], refer to "5 Tools" > "Copy Service Settings"
> "Copy Control" > "Auto Paper Off" in the Administrator Guide.