Fuji Xerox DocuCentre-IV C2263, User Manual

Page: 117 / 443

Layout Adjustment
117
Co
py
3
z
Center
Erases the shadow in the center of facing pages of a bound document or a booklet. You
can set the binding erase width in the range from 0 to 50 mm in 1mm increments.
„
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
z Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
„
2 Sided Original - Side 2
You can select this option when [Individual Edges] is selected. Set whether the same value
is set to the edge erase amount of Side 1 and Side 2.
z Same as Side 1
The same value is set to the edge erase amount of Side 1 and Side 2.
z Mirror Side 1
The edge erase amounts of Side 1 and Side 2 are set symmetrically.
Image Shift (Adjusting the Image Position)
This feature allows you to shift the position of document images so that the images are
placed on the left, right, top, bottom, or center of paper. You can also adjust the amounts of
the left, right, top, and bottom margins. If you make 2-sided copies, you can adjust the
image positions for Side 1 and Side 2 individually.
Note •
The image shift amount is set in accordance with the paper, and does not affect the setting made in
[Reduce/Enlarge].
1
Select [Image Shift].
2
Select any option.