Fuji Xerox DocuCentre-IV 2060 User Manual Download Page 103

Page: 103 / 399

Layout Adjustment

101

Co
py

Margin Shift

Allows you to specify the amounts of the top and bottom, and left and right margins in

the range from 0 to 50 mm in 1 mm increments.

Invert Image (Making Reversed Copies of Images)

This feature allows you to reverse the left and right sides of the document image or to

reverse the density (contrast) of the document image when making copies.

Note

•

When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns
to white.

Select [Invert Image].

Select any option.

Mirror Image

Reverses the left and right sides of the document image.

Negative Image

Reverses the density (contrast) of the document image.

Original Orientation (Specifying the Orientation of Loaded Documents)

This feature allows you to specify the orientation of a document so that the machine

can identify the top of the document.

Note

•

If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.

Select [Original Orientation].

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands