Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 97 / 603

Job Assembly
95
Copy
3
„ Cancel
The document data stored by [Combine Original Sets] is cleared and the copying is
canceled.
Note • The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
„ Last Original
Select this to end scanning of documents.
„ Next Original
Select this when you have another document. This is on when using the [Combine
Original Sets] feature.
„ Start
When loading the next document and select [Start], the next documents are scanned.
Note • The same operation is performed if you press the <Start> button on the control panel.
Delete Outside/Delete Inside
(Deleting Outside or Inside of the Selected Area when Copying)
Specify an area to delete everything outside or inside of when copying. Up to 3 areas
can be specified.
1
Select [Delete Outside/Delete
Inside].
2
Select any item.
„ Off
Nothing is deleted.
„ Delete Outside
Delete the outside of the selected area when copying.
„ Delete Inside
Delete the inside of the selected area when copying.
„
Area Settings
The [Delete Outside/Delete Inside - Area X] screen is displayed. Select up to 3 areas,
from [Area 1] to [Area 3].
Refer to "[Delete Outside/Delete Inside - Area X] screen" (P.96).
Note • X represents the number of the area displayed.
„ Originals
For 2 sided documents, specify the side of the area you want to delete outside of or
inside of.
z
Both Sides
The setting is applied to both sides of the document.
z
Side 1 Only
The setting is applied to only to Side 1 of the document.