Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 532 / 603

17 Appendix
530
Ap
pe
nd
ix
17
„ B Finisher Specifications
„ A Finisher Specifications
Tray type Finisher tray
×
1: Collate (offset stacking available)/ Stack (offset
stacking available)
Paper size/Supported
paper Maximum: A3, 11x17", Minimum: A4, B5
60 - 128g/m
2
Tray capacity A4: 1,500 sheets, B4 or larger: 500 sheets, Mixed stack*: 300
sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets: 50 sheets (90 g/m
2
or less), the paper
stack height must not exceed 5.7 mm.
Paper size : 1 place: Maximum A3, 11x17"
Minimum A4
2 places: Maximum A3, 11x17"
Minimum B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using
90 g/m
2
Dimensions/Weight Width 566.0
×
Depth 584.0
×
Height 940.0mm, 30kg
Space requirements
(when connected to the
main unit) Width 1,842 x Depth 1,501mm (main unit + B Finisher)
Tray type Finisher tray
×
1: Collate (offset stacking available)/
Stack (offset stacking available)
Paper size/Supported
paper Maximum: A3, 11x17", Minimum: Postcard 3.5x5.5"
(88.9x139.7mm) / Monarch 7.3x4" (190.5x98.4 mm)
60-216 g/m
2
∗
∗
Paper less than 148 mm in length must be 160 g/m
2
or more to
be delivered.
Tray capacity Stapled 30 sets or 500 sheets
Important • When using 80
g/m
2
paper
Staple Maximum stapled sheets: 50 sheets (80 g/m
2
or less)
Paper size : Maximum: A3, 11
×
17", Minimum: A4,
B5
Stapling position : 1 place (front/back, angled stapling)
Dimensions/Weight Width 250.0
×
Depth 565.0
×
Height 450.0mm, 11.3 kg
Space requirements
(when connected to the
main unit) Width 1,341 x Depth 1,501 mm (main unit + A Finisher)