Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 430 / 603

15 Maintenance
428
Ma
int
ena
nc
e
15
Replacing the Stamp Cartridge
If your machine offers fax service, and if the optional stamp kit is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables other than what is recommended by us are not
covered by the maintenance service contract.
• Before using consumables, carefully read the instructions and precautions on the
packaging.
Note • We recommend having spare consumables ready.
• To order consumables, contact our Customer Support Center.
(Product name: Stamp Replace Kit / Product code: F451)
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
2
Pull up the green lever to open the
inner cover.
3
Stick the supplied pin into the old
stamp cartridge, and pull it straight
out of the machine.
Note • If only the sponge part of the
stamp cartridge is removed,
also remove the bottom part of
the cartridge.
4
Insert a new stamp cartridge.
5
Close the inner cover, and then
close the document feeder cover until it clicks into place.