Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 424 / 603

15 Maintenance
422
Ma
int
ena
nc
e
15
9
Close the side cover.
10
Connect the power cord, then turn the power switch on of the machine.
11
Select [Fuser] on the [Consumables Status] screen.
When the [Consumables Status] screen does not appear on the touch screen, press
the <Machine Status> button on the control panel, select the [Supplies] tab on the touch
screen, then select [Fuser].
12
Select [Reset Counter] on the screen.
13
Select [Yes] on the screen to reset the counter.
Replacing the Transfer Belt Cleaner
The Transfer Belt Cleaner lasts approximately 100,000 copies and prints. The machine
will display a warning message approximately 1,500 copies and prints before the
cleaner reaches the end of its life. Another message will be displayed at this point when
the cleaner needs to be replaced.
1
Select [Transfer Belt Cleaner] on the [Supplies] screen or the [Consumables Status]
screen.
2
Pull the front cover open.
3
Rotate the Transfer Belt Cleaner unit
release lever (R2) clockwise.