Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 417 / 603

Replacing Consumables
415
Ma
int
ena
nc
e
15
4
Remove the new toner cartridge
from its box. Rotate the cartridge
from side to side approximately 10
times to evenly distribute the toner
within the cartridge.
5
Insert the cartridge, aligning the
arrow on the cartridge with the arrow
on the machine, and push until it
locks into position.
6
Close the toner cartridge door.
7
Close the front cover.
Important • A message will be displayed and the machine will not operate if the front cover is not
completely closed.
8
When the touch screen indicates another toner should be replaced, repeat steps 1 to
7.
Replacing the Waste Toner Container
The machine will display a warning message approximately 1,500 pages before the
waste toner container becomes full. The machine will shutdown when the waste toner
container is full, and a message will be displayed on the screen to indicate that the
container needs to be replaced. The ROS cleaner should be replaced at the same time.
When replacing the waste toner container, toner may spill on the floor. We recommend
laying paper on the floor beforehand.
• Used waste toner containers require special processing during disposal. Return all used
toner cartridges to our Customer Support Center.
• The use of waste toner containers not recommended by Fuji Xerox may impair quality and
performance. Use only waste toner containers recommended by Fuji Xerox for the machine.
• Replace the waste toner container while the machine is on.
Note • The number of pages is for when A4 ( ) paper is used.
• The number of copies that can be printed is only an estimate and varies depending on the
image type, paper size, paper type, and the machine usage environment.