Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 391 / 603

Supplies
389
M
ach
in
e St
atu
s
13
Supplies
You can check the status of consumables on the [Supplies] screen. The status of
consumables is shown as "Ready", "Replace Soon", or "Replace Now". For toner, the
amount is shown in percentage (0 to 100%).
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Maintenance" (P.411).
1
Press the <Machine Status>
button.
2
Select the [Supplies] tab.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
On the [Supplies] screen, you can check the following items.
Note • The items displayed vary depending on the options installed.
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
DocuCentre-II C3000 unit), the status shown may not match the actual remaining amount.
When replacing toner cartridges, we recommend you use new ones.
z
Black Toner (K)
z
Waste Toner Container [R3] [R4]
z
Cyan Toner (C)
z
Fuser
z
Magenta Toner (M)
z
Staple Cartridge
z
Yellow Toner (Y)
z
Transfer Belt Cleaner [R2]
z
Drum Cartridge (R1)
z
Second Bias Transfer Roll