Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 322 / 603

11 System Settings
320
Sy
st
em Set
tin
gs
11
G3 Line 1, 2, 4 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Using the displayed keyboard and the numeric keypad, specify with not more than 20 digits.
Note • A G3 ID (fax number) consists of not more than 20 digits, including 0 to 9, +, and space.
G3 Line 1, 2, 4 - Dial Type
Set the dial type.
„ Tone
Tone dialing line.
„ 10pps
Pulse dialing line.
G3 Line 1, 2, 4 - Line Type
Set the line type.
„ PSTN
Subscriber telephone line.
„
PBX
Private branch exchange.
iFax Control
You can make the settings relating to control of Internet fax (iFax) operation.
Fax Path
Set the iFax path.
„ Via E-mail Server
Sends e-mail through an SMTP server.
„ Direct (P2P)
Directly sends to the machine with the iFax feature, without using an SMTP server.
Broadcast iFax Profile
Set the default value for iFax profile when carrying out an iFax broadcast send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between iFax-compatible machines.
Important • The TIFF file profiles that can be handled depend on the recipient's machine with the iFax
feature.. When specifying a profile, check that it can be handled by the recipient's machine with
the iFax feature.
„ TIFF-S
This profile is the iFax standard. For documents that are larger than A4, the size is reduced
automatically to A4 for transmission.
„ TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
„
TIFF-J
Select this profile for sending documents in JBIG.
Broadcast Communication Mode
Set the default value for communications mode of the iFax Broadcast Send feature.