Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 299 / 603

Network Settings
297
Sy
st
em Set
tin
gs
11
Kerberos Server Settings
Configure the Kerberos server settings.
„ Primary Server Setup
Select the primary server specification method from [By IP Address] and [By Server
Name].
„ Primary Server IP Address
Enter the primary server IP address using values from 0 to 255.
Note • You can set this item when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Primary Server Name
Enter the name of the primary server. Up to 255 characters are allowed.
Note • You can set this item when [Primary Server Setup] is [By Server Name].
„ Primary Server Port Number
Set the Primary server port number in the range from 1 to 65535.
„ Secondary Server Setup
Select the secondary server specification method from [By IP Address] and [By Server
Name].
„ Secondary Server IP Address
Enter the secondary server IP address using values from 0 to 255.
Note • You can set this item when [Secondary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Secondary Server Name
Enter the name of the secondary server. Up to 255 characters are allowed.
Note • You can set this item when [Secondary Server Setup] is [By Server Name].
„ Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
„ Realm Name
When using Active Directory of Windows 2000 Server or Windows Server 2003, set the
domain name of Active Directory in [Realm Name]. Up to 64 characters are allowed.
Important • Enter a realm name with capital letters. Otherwise, an authentication error occurs.
LDAP Server/Directory Service
Configure the directory server, authentication method, and search attributes and
ranges for LDAP authentication and address book search by LDAP.
„ Primary Server Setup
Select the primary server specification method from [By IP Address] and [By Server
Name].
„ Primary Server IP Address
Enter the primary server IP address using values from 0 to 255.
Note • You can set this item when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Primary Server Name
Enter the name of the primary server. Up to 64 characters are allowed.