Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 294 / 603

11 System Settings
292
Sy
st
em Set
tin
gs
11
Important • This feature is applied only when a copy is made with the document glass. This setting is not
reflected in the magnification (100%) under [Variable %], [Independent X-Y%] or [Calculator
%].
Note • A magnification displays [100%] even if [Fine-tune 100%] is set.
Background Suppress (Photo & Text)
Set the background suppression level for color copying. This setting is valid when [Photo &
Text] is selected for [Original Type] on the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Background Suppression Level (Text)
Set the background suppression level for color copying. This setting is valid when [Text] is
selected for [Original Type] on the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Photo & Text / Printed Original
Set the type of original when [Halftone] of [Photo & Text] is selected for [Original Type] in the
[Image Quality] screen.
„
Standard
Copies with standard image quality.
„ Inkjet Originals
Select when copying an original printed with an inkjet printer. This improves the recognition of
inkjet colors.
„ Highlighted Originals
Select when copying an original marked with a highlight pen. This improves the recognition of
the highlight pen colors.
Original Type - Lightweight Originals
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether to
display a special original ([Lightweight Originals]).
Stamp Density
Set the translucency of the stamp printed as annotation.
You can select from three translucency values: 0% (solid), 25%, and 50%. 0% represents no
translucency.
Note • If the stamp with [0%] density is printed over text, the text may no longer be readable.
Stamp Position (Side 2)
When an annotation stamp is specified for 2 sided copying, set where to place the stamp
printed on the reverse side.
„ Opposite to Side 1
Prints in a position symmetrically opposite to the front side.
„ Same as Side 1
Prints in the same position as the front side.
Date Position (Side 2)
When an annotation date is specified for 2 sided copying, set where to place the date printed
on the reverse side.
„ Opposite to Side 1
Prints in a position symmetrically opposite to the front side.